Our Tools
ARC50 | Ideal instrument for the direct READOUT of the internal and external RADII in millimeters/inches. Available in versions with arcs 40, 130, 300, 500 and 1000. |
ST | STANDARD ROLLS. |
SP  | SPECIAL ROLLS: created on customer’s request. |
RT | ROLLS FOR TUBE: suitable for the bending of tubes. |
RO | ROLLS FOR OVAL: suitable for the bending of oval tubes. |
RQ | ROLLS FOR SQUARE: suitable for the bending of square tubes. |
RVT | ROLLS FOR TUBE WITH V GROOVE. |
RVQ | ROLLS FOR SQUARE WITH V GROOVE. |
AI | MECHANICAL (AI-M) or HYDRAULICAL (AI-H) DEVICE with double correction for maintaining at the right angle leg-in and other asymmetric profiles during the bending. |
TR | TIE BAR to bind the 3 shafts and to maintain their parallelism. Indispensable with long shafts (AL). To be used only with constant radii. |
SI | INDEPENDENT SUPPORTS to be mounted on each shaft to maintain their parallelism and to increase significantly the maximum bending capacity (to be used also for bending with variable radii). |
HE | MECHANICAL EQUIPMENT for the bending in hard-way of beams IPE, IPN, HEA, HEB and UPN. |
QR | FORTH ROLL DEVICE to bend asymmetric profiles, with open and special section. |
AC | SHORT SHAFTS. Suitable to realize coils with straight end parts and in all cases of interference of the shafts with the section in bending. |
ROS | Device to realize HANDRAILS for helicoidally stairs for DS50, DS60, DS80, ALPHA 40, ALPHA 50, DELTA 50, ALPHA 80 and DELTA60. Upon request for other models. |
FT | 6 HARDENED FLANGES in steel to be used with standard (ST) and polyvalent (POL) rolls. |
FP | 6 FLANGES in steel to be used with standard (ST) and polyvalent (POL) rolls. |
POL | POLYVALENT ROLLSon request for DS50, DS60 and DS80 BASIC. To integrate with standard rolls (ST),composed by 6 flanges and 6 inserts hardened and treated. |
AL | LONG SHAFTS for large section profiles. In most of cases it is necessary to use the tie bar (TR). |
PI GA/1 | CLAMP for automatic tube-turner device (GA). |
GA | Automatic TUBE-TURNER device for bending tubes in 3D. Standard length 6 meters. To be used withSLALOM and ALPHA models. |
TOR | Device for TWISTING plate, square and rectangular profiles to realize ornamental rods. To be used with DS50, DS60 and DS80.Upon request for other models. |
| ATV | Device to realize ORNAMENTAL SWIRLS with plate, square and rectangular profiles. To be used with DS50, DS60 and DS80. Upon request for other models. |
